Print preview: this is how the page prints

Runway wind component calculator

A wind that is 20 knots straight down the runway and a wind that is 20 knots across it are completely different propositions. This splits any reported wind into the part along the runway and the part across it.

The link includes the numbers you entered.

Your inputs

Runway designators are magnetic. Runway 27 is about 270 degrees magnetic.
The direction the wind is coming from.
Only used when the runway and wind references differ. East is positive, west is negative.
Crosswind component

Enter all three values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The crosswind component is the part of the wind trying to push you sideways off the centreline. It is what you compare against your own demonstrated crosswind figure and your own currency.

The along track component is a headwind when positive and a tailwind when negative. A headwind shortens the takeoff and landing roll. A tailwind lengthens both, and it does so faster than most pilots expect.

If a gust is entered, the calculator resolves it as well, because the gust is the figure that matters for handling on the runway.

When this is useful

  • Before every takeoff and landing where the wind is not close to straight down the runway.
  • Choosing between two runways at an airfield when neither is aligned with the wind.
  • Comparing a forecast wind against an aircraft limit during flight planning, well before you get near the airfield.
Worked example
Runway heading
090 magnetic
Wind direction
120 magnetic
Wind speed
20 kt

The wind is 30 degrees off the runway, giving a 10 kt crosswind from the right and a 17.3 kt headwind.

Check: At 30 degrees the sine is exactly 0.5, so the crosswind must be exactly half the wind speed. Half of 20 is 10, which the calculator returns. The 30, 45, 60 degree rule of thumb gives a half, two thirds and nearly all of the wind speed as crosswind, and this matches the first of those.

Common mistakes

  • Comparing a METAR wind directly against a runway designator without converting. One is true and the other is magnetic, and in some parts of the world that difference is well over 10 degrees.
  • Using the steady wind and ignoring the gust. Handling on the runway is set by the gust, not the average.
  • Forgetting that a tailwind component of even a few knots can add a surprising amount to the landing distance.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Crosswind Component Calculator." https://aviationcalculators.com/crosswind-headwind-components/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked