Print preview: this is how the page prints

Great-circle distance and bearing

The shortest path between two points on a sphere is a great circle, and it is not a straight line on most charts. This gives the distance along that path and the heading to start out on.

The link includes the numbers you entered.

Your inputs

Decimal degrees. North is positive, south is negative.
Decimal degrees. East is positive, west is negative.
Great-circle distance

Enter all four values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The distance is the shortest route over the surface of the Earth, which is what an aircraft with enough range would actually fly.

The initial bearing is the true bearing at the start. On a great circle the bearing changes continuously, which is why the final bearing on arrival is shown separately and is usually different.

On a short leg the two bearings are nearly identical. On a transatlantic leg they can differ by tens of degrees, which is the whole reason great-circle navigation exists.

When this is useful

  • Estimating the length of a route between two airfields when you only have their coordinates.
  • Understanding why long haul tracks curve north on a flat map.
  • Checking a distance from a flight planning tool against an independent calculation.
Worked example
From
53.4213 N, 6.2701 W (Dublin)
To
51.4700 N, 0.4543 W (London Heathrow)

The great-circle distance is about 243 NM, or 450 km, on an initial true bearing of 117 degrees.

Check: The published great-circle distance between these two airports is about 449 km, which is 242 NM. The calculated figure agrees to well under one percent.

Common mistakes

  • Getting the sign of a coordinate wrong. South latitude and west longitude are both negative, and a dropped minus sign puts the position in the wrong hemisphere.
  • Entering degrees, minutes and seconds into a field expecting decimal degrees. 53 degrees 25 minutes is 53.4167, not 53.25.
  • Flying the initial bearing the whole way on a long leg, which drifts well off the great circle.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Great-Circle Distance Calculator." https://aviationcalculators.com/great-circle-distance-bearing/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked