Holding pattern entry calculator
When you reach a holding fix, the entry depends on the direction you arrive from compared with the holding course. This calculator takes the inbound course and your heading at the fix and tells you which of the three standard entries applies.
Your inputs
Enter both values to see a result.
This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.
What the result means
The three entries are direct, parallel and teardrop. Each covers a range of arrival headings. Direct covers 180 degrees, teardrop 110 degrees and parallel 70 degrees, which together make up the full circle.
The result also gives the outbound heading, which is the reciprocal of the inbound course, and a plain description of what the entry involves. Left-hand patterns are the mirror image of right-hand ones, so the calculator measures the arrival heading toward the side the pattern turns.
When this is useful
- Planning the entry before you reach a holding fix in a published or cleared pattern.
- Practising holds for an instrument rating, where the entry is a common test question.
- Checking which entry a simulator or an examiner expects for a given arrival.
How it is calculated
The arrival heading is measured from the inbound course, toward the turning side of the pattern. A relative heading from 290 degrees through zero to 110 degrees is a direct entry. From 110 to 180 degrees it is a parallel entry, and from 180 to 290 degrees it is a teardrop entry.
The outbound heading is the inbound course plus 180 degrees. A teardrop entry flies outbound 30 degrees toward the holding side of that heading before turning to intercept the inbound course.
relative = arrival heading - inbound course (measured toward the turns), outbound = inbound + 180- Inbound course
- 090 degrees
- Heading at the fix
- 300 degrees
- Turns
- Right
This is a teardrop entry. Arrive on 300, fly outbound on 240 degrees, 30 degrees toward the holding side, then turn right to intercept the inbound course of 090.
Check: The arrival heading of 300 is 210 degrees from the inbound course of 090. That falls between 180 and 290, which is the teardrop sector.
Limitations
- The sector boundaries are the standard ones. The wind can move your track over the fix by several degrees, and near a boundary either neighbouring entry is acceptable.
- It does not know the pattern leg length, timing or limits. Fly the published pattern and any instructions from ATC.
- The calculator uses your heading as your arrival direction. If the wind makes your track differ, use the track you will make over the fix.
Common mistakes
- Using the outbound course in place of the inbound course. The inbound course is the one flown toward the fix.
- Applying a right-hand entry to a left-hand pattern. The sectors mirror.
- Not flying the entry turn in the correct direction for parallel and teardrop entries.
Sources
Related calculators
Cite this page
Aviation Calculators. "Holding Pattern Entry Calculator: Direct, Parallel or Teardrop." https://aviationcalculators.com/holding-pattern-entry/
Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.