Print preview: this is how the page prints

Turn radius calculator

How much room does a turn take? Only two things decide it: how fast you are going and how steeply you bank. Aircraft type and weight do not come into it at all.

The link includes the numbers you entered.

Your inputs

Assumes a coordinated, constant altitude turn.
Turn radius

Enter both values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The radius is the distance from the centre of the turn to the aircraft. The diameter is what matters when you are trying to fit a turn inside a valley or a piece of airspace.

The rate of turn is how many degrees per second you sweep through. Three degrees per second is a standard rate turn, which takes two minutes for a full circle.

Load factor in a level turn is set by bank angle alone. At 60 degrees of bank it is 2 g, regardless of aircraft or speed, and the stall speed rises by the square root of that.

When this is useful

  • Judging whether a turn will fit inside controlled airspace or a valley.
  • Understanding why a fast aircraft needs so much more room than a slow one.
  • Seeing how sharply load factor and stall speed rise as bank angle increases.
Worked example
True airspeed
100 kt
Bank angle
30 degrees

The radius is about 1,530 ft, or 0.25 NM. The rate of turn is 6.3 degrees per second and the load factor is 1.15 g.

Check: Published figures for a 100 kt aircraft at 30 degrees of bank give a radius of about 1,530 ft, which matches. The load factor check is independent: 1 divided by the cosine of 30 degrees is 1.1547, exactly as shown.

Common mistakes

  • Using indicated airspeed at altitude, which understates the radius considerably.
  • Assuming a heavier aircraft turns more widely at the same speed and bank. It does not.
  • Forgetting that doubling speed quadruples the radius, because velocity is squared.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Turn Radius Calculator." https://aviationcalculators.com/turn-radius/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked