Print preview: this is how the page prints

Required vertical speed calculator

You have a crossing restriction ahead and an altitude to lose. This works out the rate of descent it would take, so you can compare it against what your aircraft will actually do.

The link includes the numbers you entered.

Your inputs

Track distance to the point where you must be at the lower altitude.
Rate of descent required

Enter all three values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The rate of descent is what you need to hold from now to meet the constraint. Compare it with a comfortable rate for your aircraft and configuration.

The gradient and angle are given as well, because a constraint that needs more than about 6 degrees is usually not achievable without speed brakes.

When this is useful

  • Arriving high on an approach or an arrival procedure with a crossing restriction.
  • After a late descent clearance, to decide whether the restriction is still achievable or whether to say so.
  • Planning a step down through a series of altitude constraints.
Worked example
Altitude to lose
8,000 ft
Distance available
25 NM
Groundspeed
150 kt

You need 800 ft per minute, which is a 320 ft per NM gradient, or almost exactly 3 degrees.

Check: 25 NM at 150 kt takes 10 minutes. 8,000 ft in 10 minutes is 800 ft per minute. Separately, 8,000 ft over 25 NM is 320 ft per NM, and the angle whose tangent is 320 divided by 6,076 is 3.01 degrees, confirming this is essentially a standard 3 degree path.

Common mistakes

  • Using the distance to the airfield rather than the distance to the point where the altitude must be reached.
  • Using true airspeed instead of groundspeed, which understates the rate needed with a tailwind.
  • Accepting a very high required rate rather than telling ATC that the restriction cannot be met.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Required Rate of Descent Calculator." https://aviationcalculators.com/required-vertical-speed/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked