Print preview: this is how the page prints

Top of descent calculator

Starting down too late means either a rushed approach or arriving high. This works out how far from your target you need to begin, for whatever descent path you choose to fly.

The link includes the numbers you entered.

Your inputs

The altitude you want to reach, at the point you want to reach it.
Three degrees is the standard instrument approach and airline descent path.
Start the descent this far out

Enter all three values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The distance is how far out to start the descent. The rate of descent is what you need to hold to fly that path at your groundspeed.

You can describe the path as an angle, a gradient in percent, or feet per nautical mile, because all three are in common use. Three degrees is the standard instrument approach path and roughly what airliners use for a normal descent.

When this is useful

  • Planning a descent from cruise, particularly from high level where the distances are long.
  • Working out whether you can still make a crossing restriction from your current position.
  • Understanding why a descent takes so much more distance than most people expect.
Worked example
Current altitude
35,000 ft
Target altitude
3,000 ft
Descent path
3 degrees
Groundspeed
450 kt

Start down about 100 NM out. The descent takes around 13 minutes and needs about 2,390 ft per minute.

Check: The three times table rule of thumb gives 32 thousands of feet multiplied by 3, which is 96 NM, close to the exact 100.5 NM. The rate of thumb rule of half the groundspeed multiplied by ten gives 2,250 ft per minute against the exact 2,388. Both approximations sit just below the exact answers, as expected.

Common mistakes

  • Forgetting that the target altitude is not usually the airfield elevation. Crossing restrictions and circuit heights are above it.
  • Mixing up percent and degrees. A 3 degree path is about 5.2 percent, not 3 percent.
  • Using true airspeed instead of groundspeed, which matters a great deal with a strong wind at altitude.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Top of Descent Calculator." https://aviationcalculators.com/top-of-descent/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked