Print preview: this is how the page prints

True airspeed calculator

The airspeed indicator measures pressure, not speed. As air thins with altitude the same pressure means a higher real speed, so the number on the dial understates how fast you are actually moving through the air.

The link includes the numbers you entered.

Your inputs

Indicated airspeed after instrument and position error correction.
Altitude read with the subscale set to 1013.25 hPa or 29.92 inHg.
Static air temperature at altitude, not total air temperature.
True airspeed

Enter all three values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

True airspeed is your speed relative to the air mass around you. It is what goes into the wind triangle and what, combined with wind, produces groundspeed.

Equivalent airspeed is shown as a middle step. It is calibrated airspeed with the compressibility error removed, and it matters above roughly 200 kt or 10,000 ft.

The Mach number is given because it is the honest way to know when this calculation is nearing the limits of the subsonic model it uses.

When this is useful

  • Planning any leg where the wind triangle is needed, since that only works in true airspeed.
  • Comparing your cruise performance against the aircraft flight manual, which normally quotes true airspeed.
  • Understanding why an aircraft that indicates 120 kt at sea level indicates the same at 10,000 ft while actually going considerably faster.
Worked example
Calibrated airspeed
150 kt
Pressure altitude
10,000 ft
Outside air temperature
-5 C

True airspeed is about 174 kt, which is 24 kt more than the calibrated figure.

Check: Checked against the density ratio method independently: at 10,000 ft the standard density ratio is 0.7385, and dividing equivalent airspeed by the square root of that gives 173.7 kt. The two methods agree to within a knot. The 2 percent per 1,000 ft rule would have suggested 180 kt, about 6 kt high.

Common mistakes

  • Entering total air temperature instead of static air temperature. At speed the probe reads warm from ram rise, and using that figure inflates true airspeed.
  • Using indicated altitude rather than pressure altitude, which is only the same thing when the subscale is set to standard.
  • Assuming true airspeed always exceeds indicated. In very cold air at low level it can be lower.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "True Airspeed Calculator." https://aviationcalculators.com/true-airspeed/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked