Print preview: this is how the page prints

Pressure altitude calculator

Pressure altitude is the altitude your aircraft thinks it is at when the altimeter subscale is set to the standard 1013.25 hPa, or 29.92 inHg. Performance charts are drawn against it, so almost every performance calculation starts here.

The link includes the numbers you entered.

Your inputs

Height of the airfield above mean sea level.
The subscale setting that makes the altimeter read field elevation on the ground.
Pressure altitude

Enter both values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The answer is the height of your position above the standard pressure datum, which is the level where the atmosphere would read 1013.25 hPa. On a low pressure day that datum sits above sea level, so your pressure altitude comes out higher than your real elevation. On a high pressure day it sits below sea level and the pressure altitude comes out lower.

Pressure altitude is not how high you are. It is a way of describing the air you are in, so that a chart drawn in a test programme years ago can be applied to conditions today.

When this is useful

  • Before reading any takeoff, landing or climb performance chart, since nearly all of them are indexed by pressure altitude rather than elevation.
  • As the first step in working out density altitude, which needs pressure altitude before temperature can be applied.
  • When flying above the transition altitude, where everyone sets 1013.25 hPa and the altimeter is showing pressure altitude directly as a flight level.
Worked example
Field elevation
1,200 ft
Altimeter setting
1008 hPa

Pressure altitude is about 1,344 ft. The setting is 5.25 hPa below standard, which lifts the datum about 144 ft above sea level, so the aircraft sits that much higher in pressure terms than its real elevation suggests.

Check: The old rule of thumb is roughly 27 ft per hPa. 5.25 hPa multiplied by 27 gives about 142 ft, which agrees with the exact figure of 144 ft.

Common mistakes

  • Mixing up the units of the altimeter setting. A value near 1013 is hectopascals and a value near 29.92 is inches of mercury. Use the unit selector rather than converting in your head.
  • Using pressure altitude where density altitude is needed. Pressure altitude ignores temperature completely, so on a hot day it will make performance look far better than it is.
  • Entering elevation above ground level instead of above mean sea level.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Pressure Altitude Calculator." https://aviationcalculators.com/pressure-altitude/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked