Flight level to altitude converter
A flight level is a pressure altitude, flown with the altimeter on the standard setting. On a day with low pressure the flight level sits lower than its number, and on a high pressure day it sits higher. This calculator converts a flight level into an altitude on the local setting.
Your inputs
Enter both values to see a result.
This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.
What the result means
The answer is the altitude of the flight level above mean sea level, as it would read on an altimeter set to the local QNH. It shows the real height of the surface you are flying along when you are on the standard setting.
The difference from the flight level number is the same as the altimeter error from the standard setting. Below standard pressure it is negative, which means the flight level is lower than the number suggests.
When this is useful
- Checking how far a low flight level sits above terrain on a day of low pressure.
- Seeing how a flight level compares with the transition altitude when the pressure is unusual.
- Studying how the altimeter setting changes the real height of a flight level.
How it is calculated
The flight level number times 100 is the pressure altitude in feet. The local setting is converted into the height of the pressure datum above or below sea level using the standard atmosphere.
The altitude of the flight level above sea level is the pressure altitude minus that height of the datum.
altitude = FL x 100 - 145,442 x (1 - (QNH / 1013.25) ^ 0.190263)- Flight level
- FL80
- Local altimeter setting
- 1003 hPa
FL80 sits at about 7,719 ft on a local setting of 1003 hPa, which is 281 ft lower than the number.
Check: The setting is 10.25 hPa below standard. At about 27 ft per hPa that is 277 ft, which agrees with the full figure of 281 ft.
Limitations
- The conversion uses the standard atmosphere, so the real height of the surface also depends on the temperature.
- It does not set the transition level. The transition level is published and given by the controller.
- The setting should come from the region you are flying in. A setting from far away is not reliable.
Common mistakes
- Entering the full pressure altitude, such as 8000, in place of the flight level number, 80.
- Using a QFE setting. The converter needs a QNH.
- Assuming the flight level is at the height of its number everywhere.
Sources
Related calculators
Cite this page
Aviation Calculators. "Flight Level to Altitude Converter: FL to Feet on QNH." https://aviationcalculators.com/flight-level-to-altitude/
Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.