Print preview: this is how the page prints

Density altitude calculator

Density altitude is the altitude your aircraft performs as if it were at. It folds temperature into pressure altitude, which is why a hot day at a modest airfield can feel like taking off thousands of feet higher.

The link includes the numbers you entered.

Your inputs

Height of the airfield above mean sea level.
The actual temperature at the airfield, not the forecast.
Density altitude

Enter all three values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The answer is the altitude in the standard atmosphere where the air has the same density as the air you are sitting in. If your field is at 5,000 ft and the density altitude comes out at 8,500 ft, your engine, propeller and wing all behave as though you were at 8,500 ft.

Three things get worse together: the engine makes less power, the propeller bites less air, and the wing needs a higher true airspeed to produce the same lift. Takeoff roll lengthens, climb rate falls, and the margin over obstacles shrinks.

When this is useful

  • On any warm day at a high airfield, before committing to a takeoff with a full load.
  • Whenever a performance chart asks for density altitude directly rather than pressure altitude and temperature separately.
  • When comparing how an aircraft felt on two different days, since density altitude explains most of the difference.
Worked example
Field elevation
5,431 ft
Altimeter setting
1013.25 hPa
Outside air temperature
32.2 C

Density altitude is about 8,555 ft, roughly 3,100 ft above the field elevation. The aircraft will perform as though it were at 8,555 ft on a standard day.

Check: This is the classic hot day at a mile high airfield, widely quoted as giving a density altitude near 8,500 ft. The rule of thumb gives 5,431 plus 120 multiplied by 28, which is about 8,800 ft, a few hundred feet high as expected.

Common mistakes

  • Using the temperature in Fahrenheit while the field is set to Celsius. Use the unit selector rather than converting by hand.
  • Assuming a high density altitude only matters for takeoff. It also lengthens the landing roll and flattens the go around climb, which is when the margin is thinnest.
  • Treating the result as a limit. It is an input to a performance chart, not a verdict on whether the flight is safe.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "Density Altitude Calculator." https://aviationcalculators.com/density-altitude/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked