Print preview: this is how the page prints

ISA temperature and deviation calculator

The International Standard Atmosphere defines one temperature for every altitude. Comparing the real temperature against it gives a single number, written as ISA +10 or ISA -15, that performance tables and cruise charts are built around.

The link includes the numbers you entered.

Your inputs

Use pressure altitude. At standard setting this is what the altimeter shows.
Deviation from standard

Enter both values to see a result.

This is an educational and planning aid. Use current official weather, your aircraft flight manual, and the rules that apply to your flight before you act on any figure here. See the aviation disclaimer.

What the result means

The standard atmosphere starts at 15 C at sea level and cools by 1.98 C for every 1,000 ft, until it reaches the tropopause at 36,089 ft where it levels off at -56.5 C. The deviation is simply your measured temperature minus that standard figure.

A positive deviation means warmer than standard, so the air is thinner, true airspeed is higher than indicated for a given altitude, and the aircraft climbs worse. A negative deviation means colder and denser, which helps performance but can cause the altimeter to over read.

When this is useful

  • When a cruise performance table is indexed by ISA deviation rather than by raw temperature.
  • When checking whether a cold weather altimeter correction is needed, which matters on an approach in genuinely cold air.
  • To sanity check an outside air temperature reading in the cruise, since a wild deviation usually means a faulty probe or a wrong altitude.
Worked example
Pressure altitude
10,000 ft
Observed temperature
-15 C

Standard temperature at 10,000 ft is -4.8 C. The observed -15 C is 10.2 C colder, so conditions are ISA -10.

Check: Standard atmosphere tables list -4.8 C at 10,000 ft, which matches. The lapse rate is often rounded to 2 C per 1,000 ft in the cockpit, giving -5 C, close enough for mental arithmetic.

Common mistakes

  • Confusing standard temperature with standard pressure. They are separate parts of the same model, and setting 1013.25 on the subscale does nothing to the temperature.
  • Reporting a deviation with the wrong sign. Colder than standard is a negative deviation, written ISA minus.
  • Applying a deviation worked out at cruise altitude to a performance figure for a different altitude.

Sources

Related calculators

Embed this calculator

Free to put on your own site, club page or course notes. Copy this into the page and keep the link underneath, which is how readers find the method behind the result.

Cite this page

Aviation Calculators. "ISA Temperature and Deviation Calculator." https://aviationcalculators.com/isa-temperature-deviation/

Add the date you read it if your style guide asks for one. If you are quoting a figure in something you publish, please link to this page so readers can check the method and see the assumptions behind it. More on reuse and licensing: press and reuse.

Calculation checked against the worked example above on 2026-09-23. How these are checked